Control smart home heating
When the heart of winter is upon you, staying warm becomes your top priority. That’s why it’s important for your HVAC system to function properly.
As the temperature gets colder, heating problems can quickly make life miserable.
When your house feels chilly, you’ll begin to ask yourself why is my heater not working. Fortunately, you’ve come to the right place to find solutions.
This article takes a look at how to fix a heater when it’s nice keeping your home as warm as it should. Keep reading to discover insight into furnace problems and what to do about them.
1. Change Your Filter
When your furnace or HVAC unit isn’t heating properly, the first thing on your list to check should be the filter. After all, when the air filter gets dirty, it won’t warm air pass through as intended.
New filters and relatively inexpensive and can be purchased at any local home improvement store or hardware store. You’d be wise to buy several extras and keep them stored in the garage, then change your filter once every six weeks or so.
Changing the filter is a simple matter of removing the dirty filter and replacing it with a clean one. If this doesn’t solve your heating problem, move on to the next troubleshooting item on the list.
2. Replace Your Thermostat
Make sure that your thermostat is functioning properly. Set the thermostat at the desired temperature and wait to see if it kicks on and heats the home to that temp.
If not, the problem could be dead batteries or a broken thermostat. Replace the batteries, and if it still isn’t working, invest in a new digital thermostat from your local home improvement store.
Here is a resource that will help you understand why you need oil delivery.
3. Check the Heating Registers
Next, take a few minutes to check the heating registers throughout your home. These are the locations where the warm air leaves your heating ducts to heat your rooms. Open any that have been closed so that warm air won’t be wasted.
4. Make Sure the Heater Has Power
This might sound obvious, but you need to check that your heating unit has power. For starters, go to your breaker box to see if any of the breakers have been thrown. If everything looks fine but your HVAC isn’t running, you’ll need to call for service ASAP.
5. Clear Away Any Debris
When debris such as leaves, branches, or snow collects on your HVAC system, this can cause is to not operate efficiently. Simply use a broom to clear away any debris.
6. Check the Pilot Light
If the pilot on the unit has gone out, it won’t produce heat. You can relight the pilot yourself or have a heating/cooling specialist do it for you.
7. Check for Gas Leak
The final item on the list is to check for gas leaks. Gas leaks are dangerous and will result in heating issues.
Answering the Question “Why Is My Heater Not Working?”
There’s nothing worse than a cold house.
Fortunately, the tips contained here can help you identify the problem when you ask yourself “why is my heater not working?”
Keep scrolling to discover more great home improvement and lifestyle tips and advice.
Leave a Reply