
An handsome man pointing to a tablet with smart home control system.
Do you have an ADT security system? The average home burglary occurs every 14 seconds in the US. Statistically speaking, one day, your home will become a target for break-ins.
If your ADT command panel battery is running low, it can affect how well your whole system works. To learn how to replace the battery in your ADT security system, just keep reading.
Today, we’re going to share some tips that’ll help you keep your system running well.
A Tip for Replacing the Battery in the ADT Command Panel: Isolate the Problem
If you have an ADT security system in your home, you may eventually need to replace the battery in the command panel ADT. You can do this yourself, but it’s important to isolate the problem beforehand. Otherwise, you may end up replacing the wrong part.
Start by checking the power source. Make sure the ADT command panel battery is plugged into an outlet and that the outlet is working. Next, check the batteries.
If they’re old, corroded, or otherwise damaged, they may need to be replaced. Finally, check the connections. Make sure the batteries are properly connected and that there are no loose wires. If you can’t isolate the problem, call a professional.
Determine What Type of Battery You Need
When replacing the battery in your ADT security system’s command panel, it is important to determine what type of battery you need.
There are two main types of batteries used in ADT security systems:
- Lead-acid Batteries
- Lithium-ion Batteries
Lead-acid batteries are the most common type of battery used in ADT security systems and are generally more affordable than lithium-ion batteries. However, lithium-ion batteries typically last longer than lead-acid batteries and may be a better option if you live in an area with frequent power outages.
Follow the Manufacturer’s Instructions
ADT security system command panels generally have a backup battery that lasts for eight hours. If your system is going off more frequently than that, you may need to replace the battery.
Follow the manufacturer’s instructions. This is important because each system is different, and you want to make sure you are doing it correctly.
You will need to open up the panel to access the battery. Once you have located the battery, remove it and replace it with a new one. Be sure to close up the panel properly and secure it so that it cannot be easily opened.
Know When to Call a Professional
Check to see if your system is still under warranty. If it is, contact ADT customer service to have a replacement battery sent to you. If your system is no longer under warranty, you can purchase a replacement battery from ADT or from a third-party retailer.
Once you have the replacement battery, follow the instructions in your ADT security system’s manual on how to replace the battery. If you’re not comfortable doing this yourself, you can always call a professional to help.
In ADT battery replacement, it is important to have a good working backup panel battery so in the event of a power outage, your system will continue to protect your home or business.
Be Prepared for Unexpected Challenges
After following the above tips, you should now know how to replace the battery in your ADT command panel. This is an important task to keep your system running smoothly.
For extra guidance and tips, be sure to check out the rest of our blog.
Leave a Reply