No Hot Water? Try These 5 Solutions

 

Are you facing a problem with the lack of hot water in your house? If so, you’re certainly not alone.

Over 145 million Americans get their water via public sources. Many of them struggle a lot with the hot water in the house.

So if you’re one of these people and you’re looking for a hot water alternative, then this article is for you. Here are 5 possible solutions for no hot water.

Common Solutions When There Is No Hot Water

There are plenty of solutions that could help you fix your cold shower. Below are some quick fixes that might help you without the need to call professional plumbers for your cold water issues.

1. Reset Your Thermostat

Locate the thermostat’s reset button, and press it for 3-5 seconds to reset it. It might also be necessary to switch off the power to the heater at the circuit breaker before performing this step.

If the water is still not heating up, try setting the temperature higher than the current temperature, as it may be set too low.

2. Make Sure the Pilot Light Is Lit

The first step to solving the problem of no hot water is to make sure the pilot light is lit. This is done by inspecting the water heater tank and looking for the small, blue flame.

If the light is not lit, it can be relit with a match or lighter by uncovering the pilot light opening and slowly turning the knob to “On” while holding the flame to the opening. Be cautious when relighting the pilot light as it can be dangerous.

3. Check Your Circuit Breaker

The circuit breaker is responsible for the electricity running to all the fixtures in the house. So if the circuit breaker has tripped, this could be the cause of your hot water loss.

To check the circuit breaker, take a look inside your main service panel. Reset any tripped breaker, wait a few minutes, and see if the hot water returns.

4. Check the Water Flow Restrictor

You should locate the water flow restrictor, typically installed somewhere near the water heater. It is a component intended to regulate the water flow and pressure within your plumbing system.

To access the water flow restrictor, you will need a wrench and a set of pliers. Once you locate it, you can check if debris or other blockages are preventing the water from reaching the heater or other appliances.

If this is the case, simply clear out the debris. Then, reattach the component and make sure that everything is securely fastened.

5. Inspect the Plumbing Pipes

In some cases, the lack of hot water could be due to plumbing issues. If this is the case it is important to check the plumbing pipes.

First, ensure that the hot water shut-off valve is open. If it is, then locate any pipes that could be clogged and run a large amount of hot water to clear the blockage.

It is also a good idea to inspect for loose connections, faulty valves, and damaged pipes. If there is a buildup in the pipes, then use a pipe snake to remove the build-up. Additionally, use vinegar and water solution to clear any minor buildup.

Call a Professional Plumber

When the quick fixes above do not work, it can be necessary to call a professional plumber as soon as possible. A plumber can diagnose and repair any underlying issues, ensuring you have hot water as soon as possible.

Professional plumbers are available across the country to help with all sorts of hot water concerns. With their years of experience and expertise, they are the best solution for any issues regarding hot water.

If you don’t know where to start looking, you can check out this repair company servicing this area or look up plumbing services near you on the internet. There will surely be plenty of options that will work for you.

The Benefits of Hot Water

But why do we need hot water in the first place? Well, hot water is essential for a variety of tasks in most households. We have enumerated below what benefits hot water can bring to a home to help you better understand why you need to fix your hot water issue as soon as possible.

For Sanitation

Hot water sanitizes surfaces and kills harmful bacteria and viruses. It’s ideal for washing dishes, clothes, and other items because it removes dirt and dirt-borne germs.

It’s also important for bathing and hand-washing. Hot water helps kill germs and get rid of the dirt that can spread disease and cause infections. And it helps to reduce mold and mildew, giving your home healthier, cleaner air.

Helps Ease Aches and Pains

Hot water can help relax tight muscles and joints, making it easier to manage any discomfort caused by strenuous activities. The hot water can also help to reduce stress in other areas like the neck and shoulders. It is beneficial for improving circulation and relieving soreness.

Additionally, it can provide a soothing sensation for areas of the body that feel sore and achy. So it helps to improve overall well-being.

Reduces Energy Costs

Hot water can be used in hot water heating systems, which provide a more efficient way of heating the home. These systems are known to be more energy efficient than electric heating systems because they use less energy to maintain a given temperature.

Some hot water systems can work as a part of a more efficient home energy system that works to heat and cool parts of the house more efficiently.

Fix Your Hot Water Problem Now!

If you experience no hot water in your home, follow the 5 solutions listed in this article. If all else fails, contact a local plumbing service as soon as possible to ensure a swift resolution to your issue.

Remember that hot water is an essential part of running a household. Not only does it sanitize, but it helps relieve pain, and saves you money.

So don’t wait – start troubleshooting your hot water problem today!

Was this article helpful? Then explore our site for more posts like this.