Are you thinking about replacing your drywall?
Thanks to advances in technology, today’s drywall are stronger, sleeker, and more pleasing to the eye than ever before. An existing problem you’ve been overlooking could become more noticeable when swapping to a new drywall piece.
However, if you’ve never replaced drywall before, it can feel daunting to get started. By providing some basic direction, a skilled contractor can do the heavy lifting for you.
There are ways to replace drywall, and you can choose the right option for your home. Keep Reading.
Tools and Supplies Needed
Few equipment and supplies are required in replacing drywall, check out newlondonelectric.com to help make your home remodeling or addition project a reality.
A drywall saw to cut the drywall to the proper size, a putty knife to apply joint compound, a drill to screw into position, and a hammer to tap the drywall into place are all required tools. The level will also be required to ensure that the drywall is level.
Remove Old Drywall
If you already have all the tools you need, you can start by taking down the old drywall. With a pry bar or utility knife, score the drywall paper.
This lets the blade of the power tool slide over the drywall. Start at the top of the wall and work your way to the bottom.
Install New Drywall
Take the room’s measurements and then purchase the required amount of drywall. Using drywall screws, install the drywall in a horizontal position on top of the drywall studs. The screws should be placed across the holes.
Tape and Mud New Drywall
We recommend that a layer of the joint compound must be put on the seams between the drywall sheets. We should put strips of drywall tape over the joints.
Add one more layer of joint compound over the tape and then wait until the joint compound is dry before painting or wallpapering the area.
Sand and Paint New Drywall
The paint will stick to the smooth surface. When painting new drywall, it’s important to use a primer first. This will help make sure the paint sticks to the drywall and also give the paint a better finish.
And when painting new drywall, it’s important to use a paint made for that material. This will give the wall a smooth finish and keep the paint from flaking or peeling.
Learn More on How to Replace Drywall
If your drywall is broken, fix it as soon as you can. This article tells you how to replace drywall in a way that is easy to understand.
By using the right tools and supplies, removing the old drywall, installing new drywall, taping and mudding the new drywall, and sanding and painting the new drywall, you can fix your drywall and make your home look like it did when it was first built.
Follow these tips and tricks, and you’ll be well on your way to a successful drywall repair or replacement.
For more handy tips, check out our blog.
Leave a Reply