Water heating accounts for about 20% of your home’s energy use. So if you have a problem with your water heater, you need to fix it fast.
People don’t know how to flush a water heater, so they either end up not doing it or doing it wrong and causing damage.
By flushing your water heater regularly, you can help to prevent sediment build-up, extend the life of your water heater, and improve its efficiency.
Keep reading and follow these simple water heater flushing tips to flush your water heater like a pro!
Turn off the Power to the Water Heater
Before you begin the process of flushing your water heater, it’s important to take some safety precautions. First, you’ll need to turn off the power to the unit.
This will help prevent any accidents from occurring during the flushing process.
Fixing a leaky water heater can be tricky so read more here on how to do it!
Drain the Water Heater Tank
Once the power is off, you can begin draining the water heater tank. To do this, simply attach a garden hose to the drain valve at the bottom of the tank and open it up. Allow all of the water to drain out until it’s empty.
Refill the Tank With Fresh Water
If your water heater tank is empty, you’ll need to refill it with fresh water. This is an important task to do if you want to maintain a steady supply of hot water in your home.
Turn on the Power and Allow the Water to Heat Up
After you’ve refilled the tank, you can turn the power back on. Allow the water to heat up until it reaches its normal operating temperature. It’s important to keep an eye on the water level and make sure it doesn’t get too low.
Flush Again and Repeat as Necessary
Once the water is heated, you can begin flushing it out again. Repeat this process until the water runs clear and there’s no more sediment in the tank.
Depending on how dirty your water heater is, you may need to flush it a few times before it’s completely clean.
Enjoy Your Clean Water Heater!
After flushing your water heater, you should have plenty of clean, hot water to enjoy. Keep in mind that you may need to repeat this process every few months or so, depending on the quality of your water.
How to Flush a Water Heater
So there you have it! Now you know how to flush a water heater.
If you’re like most people, you don’t think about your water heater until it stops working. And when it does stop working, one of the first things you do is flush it.
But flushing a water heater can be tricky if you don’t know what you’re doing. That’s why we put together this post – to help you understand how to flush your water heater and get it back up and running as quickly as possible.
So, whether your water heater is giving you problems or not, check out our blog for more information on how to keep it in good shape. Thanks for reading!
Leave a Reply