The water in your home has been steadily flowing through copper pipes throughout your whole house.
You have been living with a small issue in the background. The issue is corrosion. Nobody really thinks about this unless there are larger problems occurring.
What kind of problems? How about leaky pipes or pipes rupturing?
Yes, people have had their copper pipes corrode and give way to leaks and bursts. There are also other kinds of issues that arise when your pipes corrode from the inside.
If you are concerned about how this may be affecting the inner workings of your water system, you have come to the right place. Read on for information about the corrosion of copper pipes
Acidity/Alkalinity Level
Water systems are designed to have a specific range of alkalinity and acidity levels in order to prevent the green corrosion of copper pipes. However, if the levels of alkalinity and acidity in the water system are not within the ideal range, copper pipes can become corroded.
There are a number of factors that can cause the levels of alkalinity and acidity in a water system to become imbalanced, including problems with the water treatment system, changes in the water source, and/or changes in the environment surrounding the water system.
Dissolved Minerals
Your copper pipes can corrode if there are dissolved minerals in your water supply. These minerals can come from a variety of sources, including well water, irrigation water, and even some municipal water supplies. The minerals can build up on the inside of your pipes and eventually cause them to corrode.
Temperature
When the water temperature rises above 60 degrees Fahrenheit, it accelerates the rate of corrosion. This is why it’s important to have a water heater that’s properly sized for your home. Too small and the water will overheat; too large and it will be a waste of energy.
Water is essential for life, but it can also be destructive. Corrosion is a major problem for copper pipes in your water system. Suburban Plumbing is here to help you understand the causes of corrosion and how to prevent it.
Flow Rate
There are many factors that can contribute to the corrosion of copper pipes in your water flow rate. One of the most common is the presence of high levels of chlorine in the water. This can be from either natural sources or from the use of chlorine tablets in the water. Another factor can be the presence of other metals in the water, which can act as catalysts for the corrosion process.
Prevent Corrosion of Copper Pipes in Your Water System
If your copper pipes are corroding, it could be because of the water in your system. There are a few things you can do to prevent the corrosion of copper pipes, such as using a water filter or installing an anode rod in your water heater. If you suspect that your copper pipes are already corroding, you should contact a plumber to have them inspected and replaced if necessary.
Bookmark our site now and come back for more insights and valuable information!
Leave a Reply